Specification of 2x2 led troffer luminaire

Advantage of 2x2 led troffer luminaire

1.The fitting is very light and thin.The thickness 38mm only.
2.The fitting is brighter and it can save more energy.
3. The light of one led is 6 times than one incandescent lamp when they are the same wattage.
4.Long lifespan more than 50000 hours.
5. The light looks soft and uniform.

Feature of 2x2 led troffer luminaire

1. Die formed of 24 gauge cold-rolled steel body.

2. All steel surface are painted after fabrication with high gloss baked white matte powder painted.

3. High reflectance baked white acrylic matte paint finish.

4. Fully recessed luminaire fits standard T-Grid ceilings.

5. All electrical components are UL/cUL approved, Input Voltage from 120-277v.

6. SAMSUNG LM561B chips.

7. OSRAM, PHILIPS driver, 0-10v standard dimming.

8. 5 years warranty.

Picture of 2x2 led troffer luminaire

Application of 2x2 led troffer luminaire

1. Commercial and exhibition locations
2. Hotel, conference room
3. Factory, office, house
4. Airport, metro station
5. School, hospital and other public places

Installation of 2x2 led troffer luminaire

1. Embedded installation

step1: Open the hole to install the lamp according the size of down light;

step 2: Push the lamp in the hole;

step 3: The input terminal of external power supply should connected to the input terminal of the panel.

While input terminal of external power supply should connect to the power.

2. Hoisting installation

step1: find the fixed panel lights in the approximate location of fixed surface.

step 2: the corresponding position in the drill hole to play good.

step 3: the expansion screw into the hole.

step 4: sling panel lamp through the panel lamp cord fixing piece.

step 5: use screw fixed lock on a fixed surface.

Other Series of BBT led troffer luminaire with UL approval